Uplift force
An uplift force is any upward pressure applied to a structure that has the potential to raise it relative to its surroundings. Uplift forces can be a consequence of pressure from the ground below, wind, surface water, and so on.
Water pressure can exert an uplift force on a structure due to high rainfall, for example by causing clay soils to expand. This can be problematic if the upward forces are greater than the forces being exerted downwards by the structure. To overcome this risk, the structure must be appropriately designed to provide greater resistance against uplift forces, and also a drainage system to relieve the water pressure.
For more information, see Ground heave.
All roofs are subject to wind uplift, which will vary according to location, terrain, height, size, shape, exposure and so on. Wind uplift occurs when the air pressure under the roof is greater than the air pressure above it. This can be exacerbated during high wind, as air infiltration into the building can increase pressure below the roof, whilst the speed of wind over the roof surface can reduce air pressure above it, in much the same way it does over an aircraft wing. This can cause damage to the roof if the difference in pressure becomes too great.
'BS EN 1991-1-4:2005+A1:2010 Eurocode 1. Actions on structures. General actions. Wind actions' defines the methodology for calculating likely wind loads which then allow a roofing system to be appropriately designed.
[edit] Related articles on Designing Buildings Wiki
- Bearing capacity.
- Floor loading.
- Ground heave.
- Hurricane design considerations.
- Lateral loads.
- Limit state design.
- Moment.
- Racking.
- Roofing defects.
- Settlement of buildings.
- Subsidence.
- The design of temporary structures and wind adjacent to tall buildings.
- Types of structural load.
- Uniformly Distributed Load.
- Vibrations.
- Wind comfort simulations.
- Wind load.
Featured articles and news
International Electrician Day, 10 June 2025
Celebrating the role of electrical engineers from André-Marie Amperè, today and for the future.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.
Skills England publishes Sector skills needs assessments
Priority areas relating to the built environment highlighted and described in brief.
BSRIA HVAC Market Watch - May 2025 Edition
Heat Pump Market Outlook: Policy, Performance & Refrigerant Trends for 2025–2028.
Committing to EDI in construction with CIOB
Built Environment professional bodies deepen commitment to EDI with two new signatories: CIAT and CICES.
Government Grenfell progress report at a glance
Line by line recomendation overview, with links to more details.
An engaging and lively review of his professional life.
Sustainable heating for listed buildings
A problem that needs to be approached intelligently.
50th Golden anniversary ECA Edmundson apprentice award
Deadline for entries has been extended to Friday 27 June, so don't miss out!
CIAT at the London Festival of Architecture
Designing for Everyone: Breaking Barriers in Inclusive Architecture.
Mixed reactions to apprenticeship and skills reform 2025
A 'welcome shift' for some and a 'backwards step' for others.
Licensing construction in the UK
As the latest report and proposal to licence builders reaches Parliament.
Building Safety Alliance golden thread guidance
Extensive excel checklist of information with guidance document freely accessible.
Fair Payment Code and other payment initiatives
For fair and late payments, need to work together to add value.
Pre-planning delivery programmes and delay penalties
Proposed for housebuilders in government reform: Speeding Up Build Out.
High street health: converting a building for healthcare uses
The benefits of health centres acting as new anchor sites in the high street.